Tips For Replacing a Window Handle
It is easy to replace your window handle from the convenience of your own home. Use these helpful tips to ensure smooth operation and a stunning looking finish.
Begin by removing the screw covers to reveal the screws within your uPVC window handle. Then measure the spindle length to ensure that you get the correct size replacement.
1. Take a measurement of the Spindle Length
It is crucial to have the right size spindle when replacing the window handle. It can affect the tightness or looseness of the handle as well as whether the handle will lock correctly into the window frame. The spindle is a metallic shaft that connects the handle to the lock inside the window frame. The spindle can be found in the standard 8mm industry cross-section or the older versions that measure 9mm. The current industry standard is 8mm but this wasn't always the case, so when purchasing a new handle, it's essential to check the measurements.
The easiest way to measure the spindle length is to take off the handle you have already installed and this can be done by turning it to the open position, then unscrewing the two screws (which might be hidden behind plastic caps that will have to be removed) that hold the handle. Once the handle is removed, measure the distance from the base to the point at which it ends. This will provide you with the measurements required to buy a new one.
There are a variety of options when you are looking to pick the right window handle. From sleek chrome that can fit into a modern home to traditional bronze with a burnished finish that looks stunning in restored Georgian rooms, or even the more quaint Tudor cottages with curled mongoose tail latches. The options are endless but the most important thing to do is choose a style that complements your home.
Espag handles are usually installed to uPVC windows and are identical in size with 43mm centres (2 fixings). Cockspur handles are available in a variety of sizes, ranging from 58mm up to 62mm. Cadenza window handles have a different size because they have an angle blade that operates the multi-point lock mechanism within the window.
When choosing a window handle it is important to consider the hand you use to open your door. Inline Espag window handles aren't handed and can be used for left or right handed windows. Cranked window handles can only be used with windows that open in a single direction.
2. Remove the Handle
A window handle that has fallen out can be frustrating, regardless of whether the handle has been damaged or worn out. The good news is, you can repair the uPVC handle by yourself. All you need is a few basic tools and some time to complete the task.
You will need to first open the window, and make sure it's not locked. Then, remove the screws that hold the handle in position. Once these caps are removed, you are able to work on removing the handle itself.
The handle is attached to a spindle inside the window frame. It is fixed by either a screw or pin, depending on the type of handle. The most popular handles are the inline Espagnolette and the cockspur handles. Both kinds of handles are found on casement windows including aluminum ones. They can be locked by using keys to prevent the opening of the window from the outside or you can lock them by turning the handle clockwise.
To remove the handle you will need a flat-bladed screwdriver. After this is released, the handle will fall off the spindle. Once the old handle is removed, you will need to measure the length of the spindle and make sure that the new handle is compatible with the spindle's length.
Once you have determined the proper size for the handle, screw it into place. It is crucial to ensure that the handle is securely fastened and that it is rotating in the correct direction (clockwise if the handle is open, or counterclockwise if the handle is closed). It is important to make sure that the handle has not been installed upside down.
Replace the cap screws. After you've done this, you can test the handle to confirm that it is working correctly. You can also test the locking system by moving the handle from an unlocked position to the locked position and then back.
3. Take off the Screws
A uPVC window handle is a crucial element of any home and is usually the first item to show signs of wear and wear or damage. This can be caused by natural factors or through frequent use, and sometimes malicious damage caused by opportunistic criminals who may want to open a closed window and gain access to your home. But, a simple fix is a simple solution and prevent the issue from recurring.
uPVC handles can also be difficult to open when the locking mechanism isn't functioning correctly. It's usually possible to resolve the issue by replacing the multipoint locking mechanism rather than the whole handle. This could save you money.
After you've removed the old handle, you'll need to take off the screws that were holding it in place. The screws are typically located on the inside of the handle base. You may require a screwdriver for this and it's important that you don't over tighten the screw as this could cause the handle to loosen.
You'll then have to find the fixing screws or pins that hold the new handle in the correct position. These are usually located on the inside of the base of the handle. You will need an instrument to remove them. After you have removed them, you'll have to replace the screw caps in the event that you want to do so, and then test the new handle to ensure it's working properly.
Install the handle by adjusting the spindle to the window's cutout mechanism. Then screw it into. Make sure the handle is in an open position and that the screws are tightly fixed before replacing the screws' covers in the event that you want to do so. It's done! You can enjoy the new window handle. This should help you avoid expensive window and door replacements in the near future. If you would like more assistance in this, or any other aspect of your uPVC windows, don't hesitate to contact us.
4. Fit the New Handle
The replacement of a damaged window handle or updating it is simple and can be completed within just a few steps. The most important thing is to identify the kind of handle, determine its spindle and identify the tools you'll require to complete the task. Safety is always the primary priority when working with windows and tools. Take your time to follow the steps and make sure that you have the right handle for use.
To begin, find the screws that hold your window handle. Remove these while holding the handle firmly to stop it from falling and causing an injury. Once the screws are removed, you can place them in a safe place to be replaced later.
After you have removed the handle, you are now able to install your new one. It is crucial that the handle fits perfectly to ensure that it works properly and locks the window in place. Next move repairmywindowsanddoors.co.uk attached to the handle into the hole in the window mechanism.
The final step is to replace the caps on the screws and then test the handle to make sure it is working. If you're not happy with the results or if your window does not open or close correctly contact our experts for assistance.
Most UK homes are equipped with uPVC Windows. Therefore, a large number of windows will require replacement at some point due to damage or wear. The procedure is simple and can be done by anyone with some knowledge of DIY. It is important that the handle you use matches the size and style of your window. Contact us if aren't sure of the kind of handle you require. They'll be able guide you through all the choices.